Hot water is something that we require in our daily lives. And when we find the one fine day you need to get a bath in cold water on winter days. It is so hard right? These are the scenarios when we encounter a water heater that stops heating. We start to panic, until we get to the bottom of it for why is my geyser not heating up, we don’t rest.
It is impossible to have a shower in cold water, if you’re not used to it. It depends on if people are completely fine bathing everyday with cold water or not. But for people like me, I hate having a bath with cold water. And when we see our geyser not heating up, this makes our life harder.
As you all are aware the electrical home appliances are always unreliable. It can be washing machines, televisions, refrigerators, and other electrical appliances. The breakdown is a common scenario for these devices. But when we see the solutions, some of the fixes can be easily done by sitting at home. If there are any major instances, you may require the support of a technician.
In this blog post, we will discuss why is my geyser not heating up. The content has been structured with the common problems that consumers have faced in the past and the solutions with them.
Why is my geyser not heating up?
Before we discuss the problems and solutions to fix your geyser. Let me give you a safety disclaimer: The electric water heaters are one of the highest voltage consuming appliances that are present in your home. And when you are proceeding to fix it, you need to be extremely careful. Starting from turning off the power supply and detaching the cable. It is highly recommended that you can even turn off the main power supply of your home. After that, you can use the electric tester to see whether there is any power passing to the wires or the metal parts of the geyser.
Thanks to modern-day technology, the parts that have been used in water heaters aren’t complex. In this section, you will find the list of common areas where consumers have encountered problems. You can take the necessary solutions which can be performed without any professional help. But for some problems, you require technical assistance.
1. Check the basics
Before we dive into the complex scenarios, let’s start with the basics. These are the scenarios that are completely dependent on the power related source.
You can start the process by checking the cables whether it has been properly connected or not. Because it has been popularly found that many consumers haven’t connected their cable to the switchboard correctly. Due to this, the electric geyser stops heating the water.
The second process would be checking whether there is any low power supply. Due to the low supply of power for the electric geyser, sometimes the geysers can’t manage to operate. You need to check whether there is enough power supply being passed through the electric geyser.
2. Damaged valves
As every electric geyser has been integrated with a valve. These valves can be for controlling the supply of water or it can even regulate the pressure of water inside the tank. Sometimes the valves can’t sustain the pressure that has been created by the water inside the tank. And due to this pressure, it usually gets damaged and it stops the hot water supply for you.
The solution for this problem would be to replace the part. Because this is a part that is very hard to repair, and you can easily find the pressure valves in every hardware store near your home. You can fix it by yourself, or seek technical assistance.
3. Due to low water pressure
If the water pressure is low and it is being supplied to the electric geyser, then sometimes the electric geyser stops heating up. Because the water heater requires an optimum amount of pressure within the tank. As it needs to continuously heat the water and supply it out. Without proper pressure of water, the geyser will stop heating up.
First, you need to check whether any sediments have been stuck in the supply of water to the geyser. You can easily check the pipe that has been connected with the geyser, detach it, check if there are any dust particles or sediments getting blocked. If you see that there are no such particles, then this can be the problem within the water pipes. It can be only resolved through the plumbers, you need to check for the cause why the water pressure is so low.
4. Water leakage
This is one of the common scenarios where consumers have encountered. Because whenever you observe that there is any leakage from the electric geyser. Depending upon the type of technology that the geyser has been built, it stops heating the water. This usually happens whenever the electric geyser is very old. And you can see the leakage from the bottom part of the geyser or it can even happen through the side.
The leaking water from the geyser can cause huge damage to your walls as well as the machine. One of the major reasons can be due to the corrosion which has occurred within the tanks of the geyser. The process to detect this problem would be checking if any loose parts are hanging around. And if you find that the fittings are not proper or it makes some slight sound, there are chances of corrosion.
If you find the water tank has got corrosion, it can’t be repaired. It needs to be replaced and the water inside the electric geyser should be immediately drained out. This step is taken so that the leakage stops affecting the walls of your home.
How does a electric geyser work?
5. Check if any sounds are made by the geyser
If you can listen to the sounds made in the format of rumbling type. These are the sounds that denote that there is an internal problem within the tank of the geyser. The sounds can be ticking as well as whining. This is majorly happening due to the excessive sediment getting built up within the tank.
The basic solution for this problem would be to drain out the entire water tank. When you can manage to drain out water, you can see the impure sediments getting accumulated. The sediments sometimes can’t be noticed, by flushing out the water from the machine, it helps.
Related: How does a gas geyser work?
6. The water is extremely cold
If you are living in a very cold region, and when you find that the water supplied to the electric geyser is extremely cold. Then the electric geyser will not be able to manage to heat it. You need to check the capabilities of the electric geyser whether it can sustain heating extreme cold water.
When we look at the part of the solution, we need to check the thermostat of the electric geyser. Some of the geysers have this feature which can be configured manually. If you don’t find such a feature, you need to reach out to the technicians for changing the configuration. If they don’t have any solution for this, you may need to take an electric geyser that has the power of heating extreme cold water.
7. The geyser takes a lot of time to heat water
Usually, any electric geyser will easily heat the water in a few minutes. And sometimes when the tank is empty, it takes some time to get the water filled within the tank. After the tank is filled, the heating process starts. But if we have to see the overview of heating time taken by the geyser is around 10 minutes.
And when you find that geyser is taking a lot of time to heat the water. This can be generally due to the heating elements aren’t functioning properly. The problem can only be fixed by replacing the parts which are involved in heating the water. This usually depends on the type of electric geyser that you have purchased from the market and the ideal way is to consult the technicians.
Related: How to use electric geyser?
Conclusion
When we look at the above problems and solutions, few of them can be easily fixed from your side. But some of the solutions require assistance from authorized experts.
If we see the functionality that is involved within the geyser to heat the water is very simple. As the majority of parts that are dependent on heating the water are the elements. These are the parts which are not so expensive and can be easily replaced by you or the technicians.
Before you proceed to resolve any such instance, always see that the power is completely disconnected from the electric geyser. This will avoid the major accidents that can happen through the high voltage electric supply.
The best practice before troubleshooting any problem would be to check the warranty. As you can get your geyser serviced at free of cost. You can check the warranty details marked on the geyser. You can also see the details from the invoice which comes with the package. If you don’t get the invoice, talk to your dealer.
Further, read: